Light for life jacket A100

Complete the A100 children’s lifejacket with this automatic flashing light for greater visibility.

This lifejacket distress light improves the visibility of the wearer at sea thanks to its automatic activation upon immersion in water. The light can also be switched on or off manually using its ON/OFF button.

Product features:

• Compatible with the A100 children’s life jacket
• Flash frequency: 50 to 70 times per minute, light intensity 0.75 cd
• Automatic activation upon immersion; can also be switched on or off manually using its ON/OFF button
• Battery life: 28 hours (24 hours at -1°C / 30°F)
• Non-rechargeable: Once the battery is exhausted, the light must be removed from the life jacket and replaced with a new one.
• Storage temperature: -30°C to 65°C / -22°F to 149°F
• Operating temperature: -1°C to 30°C / 30°F to 86°F
• Shelf life: 5 years from the manufacturing date, visible on the side of the light
• Fire-resistant, oil-resistant, mould-resistant, corrosion-resistant, waterproof
• Light dimensions: 62 x 28 x 31.5 mm
• Buckle dimensions: 61.2 x 9.5 x 11.7 mm
• Weight: 30g / 1oz
• Certifications: USCG, MED, SOLAS

This USCG, MED and SOLAS-certified product includes:

• An automatic flashing light that activates automatically upon immersion in water, with a battery already included (1 x 3.0 V, 750 mAh, CR2 lithium battery)
• A fastening clip

Installation:

1. Take the bracket and slide it into the fabric of the Floatee logo. The aim is to ensure that the light cannot come loose if dropped.
2. Take the light and position it above the bracket.
3. Clip the light onto the bracket. It should no longer be able to move or come off.

Inspection:

1. Visually inspect the light for any signs of damage or corrosion.
2. Test the light by submerging the water detector (i.e., the two yellow metal parts on top of the lamp, on the opposite side of the ON/OFF switch) in water. The light should switch on immediately, then switch off when you press the ON/OFF button.
3. Remove the detector from the water and dry it. The light can be switched off manually using the button.
4. If any defects are found in the appearance or operation of the light, it must be considered faulty. The faulty light must be removed from the life jacket and replaced with a new unit.

Shipment launched today or the next working day

Delivery fees depend on your location.

We’ll keep you updated on the status of the delivery.

Returns are possible up to 14 days after reception (online purchasing).

This light requires no maintenance, but whilst in storage, do not touch the water detector and ensure it remains dry at all times.

Ensure the light is facing outwards, not towards the fabric.

Once clipped in place, it is difficult to remove the light from the holder without damaging the clip. Check that the assembly is correctly positioned before attaching it to your A100 child’s lifejacket.

The light must be inspected before installation and checked regularly thereafter.